設備特點Features

1、 采用先進的硅酸鋁板材料，運用中國魯班棒卯工藝加上硅酸鋁板膠水相結合組成無縫爐膽，硅酸鋁板材

料優于一般保溫材料，抗鋁水腐蝕能力強、不易掛渣、不易粘鋁、容易清渣，保溫效果更佳，爐體使用壽

命更長。

2、 爐壁采用先進的納米材料、高密度陶瓷纖維斷熱板，使?fàn)t表溫度更低，爐表溫度常溫加15攝氏度(除加

熱器周圍)

3、 采用日本華井侵入式加熱管以電能底部加熱，電控發熱系統由SCR比例式控制，爐體表面平均溫度控制在

環境溫度+35°C以下(除加熱器周圍外)，減少熱損失，以更好的改善操作環境，節約能源，穩定湯溫， 提局鋁質。

1. Adopt advanced aluminum silicate board material, using Chinese Luban tenon and mortar process plus aluminum silicate board glue to form a seamless furnace, aluminum silicate board material is superior to general thermal insulation materials, strong resistance to aluminum water corrosion, not easy to slag , Not easy to stick aluminum, easy to remove slag, better heat preservation effect, longer furnace life.

2. The furnace wall adopts advanced nano-materials and high-density ceramic fiber heat insulation plates to make the furnace surface temperature lower, and the furnace surface temperature is 15 degrees Celsius at normal temperature (except around the heater)

3. 

The Japanese Huajing intrusive heating tube is used to heat the bottom of the electric energy. The electronically controlled heating system is proportionally controlled by SCR. The average surface temperature of the furnace body is controlled below the ambient temperature +35 C (except around the heater) to reduce heat loss. To better improve the operating environment, save energy, stabilize soup temperature, and improve aluminum quality.

BRBJ 鋁合金機邊熔化爐基本參數 BRBJ Basic parameters of aluminum alloymachine side melting furnace